Issue the command for checking the current Cisco IOS XE Software Ĭisco IOS XE Software, Version 03.16.06.S – Extended Support ReleaseĬisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S6, RELEASE SOFTWARE (fc3)Ĭopyright (c) 1986-2017 by Cisco Systems, Inc. Success rate is 100 percent (4/5), round-trip min/avg/max = 1/1/2 ms Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds: R2(config) #ip TFTP source-interface GigabitEthernet0/0/0 ***** ( if your TFTP timeouts please do issue this command).R2(config) #interface GigabitEthernet0/0/0.In this Lab, I’m working with a Cisco 4000 Series Integrated Services Router which is different than with a traditional router IOS upgrade. Use the following IP address: 192.168.2.1.Issue the ncpa.cpl(network adapter) command on the cmd, then set a static IP on your Ethernet Adaptor. Use custom server binding and point the IP address to your ethernet adapter. Run Solar Winds TFTP server file -> configure -> Server Bindings I will be using the Solar Winds TFTP Server for my lab environment. Here are a couple links for free TFTP server:
Please follow the next steps:įirst of all, please make sure you have a TFTP server installed on your device (PC).
This post will show you how to install and also upgrade your Cisco device’s IOS.
